|
chaussettdeguerr |
  |
Débutant
Déconnecté
Niveau : 1
N° de Membre :
13172
Ancienneté : 90%
Participation : 1%
Inscription: 08 Aug 2004
Localisation: hainaut belgique
Age: 63
Messages: 361
Sujets Lancés : 51
|
en tout cas, le sp1 est indispensable. Je trouve le sp2 chiant alors je ne l'ai pas installé, mais tourner sans sp1 ne me viendrait pas à l'idée : il doit en plus des mises a jour de sécurité apporter pas mal de corrections logicielles, ne fut-ce que la gestion du usb2.0 par windows.
a part ça, mon graveur pioneer 107d est une merveille et ne rate pas une gravure, que ce soit avec nero ou un autre prog, avec le firmware modifié 1.13 que je lui ai greffé des achat :
Drive: Pioneer DVR-107 (Dual format 8x speed DVD+/- Burner)
Also known as: DVR-A07, DVR-107D, DVR-A07D, etc.
Firmware Rev.: v1.13
Author: >NIL:
Date: 2004.04.29 - 20:55 GMT (1.13 Release #4 - FINAL)
Patched: o RPC-1 (Region Free):
Remember, patching your drive to region free is only half
the job. A region free drive will not turn your system
region free by itself. For more info, please read
http://forum.rpc1.org/viewtopic.php?t=239
o 12xRip (Unlimited ripping speed):
The official firmware from Pioneer limits the ripping
speed on video discs. This limitation has been removed.
12x is only the maximum THEORETICAL speed that the drive
can achieve, but not the sustained speed you are likely to
get when ripping. Most DVD's will start ripping around 2x
to 4x and end up around 8x or 10x. THIS is normal.
o nx4all : All *workable* speeds for all media!
This firmware allows you to select ALL burning speeds on
ALL media. The official firmware from Pioneer only allows
a limited set of Pioneer approved media to use these
specific speeds but this patch removes that limitation. It
should NOT alter the write strategies for approved media
however.
PROPER BURN OF NON APPROVED MEDIA IS NOT GUARANTEED!
Not patched: - Bitsetting ("Burn on -R media instead, people!!!")
- nx4all on +RW media. For the reason behind that, see:
http://forum.rpc1.org/viewtopic.php?p=108571
Tests showed that burning +RW media at higher speed than
the manufacturer recommended was a bad idea - ACCEPT IT!
Release Notes: This firmware was used succesfully to burn *QUALITY* 4x +/-R
media at 6x and 8x speed and *QUALITY* 2x -RW media at 4x.
If you are not sure whether the media you are using will
burn properly at high speed, please look for other users
experience at http://forum.rpc1.org
AGAIN, HIGH SPEED BURN OF LOW GRADE MEDIA IS NOT GUARANTEED
Flashing Instructions: 1/ Download the latest version of DVRFlash from
http://pioneerdvd.rpc1.org and extract the executable you
need (Windows, DOS or Linux) in the directory where you
extracted the patched firmwares
2/ READ THE DVRFLASH INSTRUCTIONS!!!
3/ If you are flashing from windows, and I: is your DVR-107
drive, open a DOS window and type a command like:
DVRFlash -v I: R7100107.113
or, *IF* you need to flash the kernel (Rebadged -> Pioneer):
DVRFlash -vf I: R7100007.113 R7100107.113
Useful Links: http://forum.rpc1.org/ (DVD-R/RAM/+RW section)
http://pioneerdvd.rpc1.org/
Thanks to: Flash, Agent Smith and the generous contributor who sent
me a DVR-107 drive ;þ
Thanks should also go for Herrie who helped identify the
best strategy for +R media
NB: The kernel file in this patch is just the 1.09 kernel firmware, with revision
bumped up. The binary data of the kernel is unmodified.
__________________
notre propre existence n'est qu'une illusion d'autrui
Signaler ce message à un modérateur | IP: Logguée
Temps en ligne : 3 Jours, 3 Heures, 41 Minutes, 51 Secondes en ligne
|
05-12-2004 19:13
ADSL:1200/200 (1536/256)
(poiuchs : 
)
